Car 2.5" Exhaust Clamp with Rod & Rubber Exhausts Hangers Kit,Exhaust Hanger Set for Fixing & Reducing Noise,Essential Car Accessories U Muffler Clamp for Exhausts System

EXHAUST CLAMP & RUBBER EXHAUST HANGERS KIT TO REJECT NOISE/VIBRATIONProduct AttributesColors: Silver, BlackSizes: U-clip Bayonet ID: 2.5 inchRod Length: 9.85 inchRubber Hanger Size: 2.86*1.83*0.83 inch / Hole ID: 0.48 inchWeight: 17.78 ozMaterial: Carbon Steel Galvanized, RubberPackaging: Exhaust Clamp with Rod*1, 2 Holes Rubber Exhaust Hanger*1Product Functions & Features1. Applicable Pipe Size: You can use our exhaust clamp to fix 2.5 inch pipes, adjustable from 5-8 mm2. U Clamp & Rubber Exhaust Hanger: U-clamps are mainly used for fixing mufflers and other components, and are used in conjunction with rubber exhaust hangers to effectively reduce noise levels3. Assisted Rod: Distribute the weight of the system's heavier metal components and reduce stress on the connection points by using our length and angle adjustable hangers that can be adjusted up/down/360°Product Installation1. Replacement of rubber hanger2. Snap the U-clamps into the tubes and the rod into the holes in the rubber hanger3. Attach the base and tighten the supplied nuts

• Scope of Application: Good helper for repair. You can use our clamp for fixing the muffler pipe/exhaust pipe of your car system. Please note that it can be used for pipes with diameter of 2.5 inch (adjustable range 5-8 mm), please read the above information
• Controls Noise Reduction: The saddle-shaped U clamp evenly distributes clamping force, reducing vibration and resonance caused by loose pipes, and together with the rubber exhaust hanger, it further enhances vibration damping and improves ride comfort
• Assisted Hanger: We offer up to a 9.85 inch long rod on the side of the exhaust pipe clamp, different vehicle system layouts may require different mounting angles. By adjusting the nut, the hanger can be turned up/down/360° for good support
• Rustproof/Soft: The use of carbon steel galvanized as the main material for exhaust clamps, galvanized layer provides a protective film for the carbon steel, slowing down rust, soft rubber exhaust hanger not easy to rupture at high engine temperatures
• Pre-purchase Note: You will receive exhaust clamp with rod*1, 2 holes rubber exhaust hanger*1, rubber exhaust hanger total size is 2.86*1.83*0.83 inch, small hole ID is 0.48 inch, U-type bayonet ID is 2.5 inch, you can refer to the above information